Inductive SM Series Information & data

SM200 

Stroke 4 & 8mm, small size dia.10mm

external electronic, also gauge type. IP66, 0,25% & 0,5%

SM260

Stroke 0-24mm to 0-200mm, dia.12mm, 0,25% &  0,5%, IP68

external electronic, also gauge type and ball bearings both ends.

SM205 special miniature type

Stroke +/-1,5 & +/- 2mm, small size housing, 0,25, 0,5%

 

SM206 special miniature type

Stroke +/-1mm, small size housing, 0,25, 0,5%

Very high sensitivity = 765mV/mm

 

external electronic as SM120 to be used also for these units.

 

 

205

206

 

 

 

SM270 

Stroke 5, 10, 15 & 20mm, same small size as SM210 dia.10mm, 0,25% &  0,5%, IP66/67

build in electronic with 5V supply, 0-4V output.

SM277 

Stroke 5, 10, 15 & 20mm, same small size as SM220 dia.10mm with internal return spring, 0,25% &  0,5%, IP66/67

build in electronic with 5V supply, 0-4V output.

 

SM210 Shown in mounting block with T option = gauge Principe 

SM340 

Stroke 5, 10, 15 & 20mm, same small size as SM220 dia.10mm with internal return spring, 0,25% &  0,5%, IP66/67

Build in electronic with 4 options outputs 0..5V, 0..10V & 4..20mA    2 wire

 

 Internal spring molded with PUR cable

             External spring M12 connector

SM34 IP67 PUR Cable

M210  

Stroke 5, 10 & 15mm, small size dia.10mm, 0,25% &  0,5%, IP68

external electronic, also gauge type as shown here

SM300   

Stroke 5,10,15mm  integrated electronic, 0/4-20mA,  0/+/- 10Volt, M30x1.5 housing, IP67, 0,25% & 0,5% accuracy, max. 800Hz return spring option as shown.

SM220

Stroke 4, 5, 8mm small size dia.10mm, 0,25% &  0,5%  IP66

external electronic,  only gauge type with spring inside housing.

SM222  4, 5, 10,15 & 20mm

    .

 

 

 

 

 

 

SM222

SM320 

Stroke 5,10,15mm  integrated electronic, 0/4-20mA or 0/+/- 10Volt, 25x25mm aluminum housing

 

SM330 

Stroke 5,10,15mm  integrated with programmable electronic, 0/4-20mA,  0.. 5Volt, 0...10Volt, 25x25mm aluminum housing, accuracy: 0.5%, 0.25% and 0.1%

SM400 

Stroke 0 - 20mm to 0- 200mm, 

size dia.25mm, 0,25% &  0,5%, 

IP66,

Electronic with 20..32V supply         

output 0/4..20mA, 0..10V, +/-10V.

SM403.40.1.KP10TX54

Stroke 0 - 40mm spring return IP68 sensor with IP68 protection down to 5m submersion 

SM240

Stroke 5, 10 & 15mm, size M12x1 thread  0,25% &  0,5%  IP66/67

external electronic,  also gauge type 

 

SM410/430 

Programmable sensors

Stroke 0 - 20  to 0- 360mm, size dia.25mm, 0.10%,0.25% &  0,5%, IP66

build in electronic with 10..32V supply and programming output through 16bit D/A converter 

0/4..20mA output.                            or 0..10Volt output 

or 0..5Volt output

SM120   

Excitation unit, most common used external electronic unit for SM sensors, can supply 1 or 2 sensors, different models/output as:

0/4..20mA output.                              0..10Volt output,                           +/-10Volt output

 

    Installing SM120 sensor  

SM420 

Stroke 0 - 80mm to 0- 360mm, 

size dia.25mm, 0,25% &  0,5%, IP66

build in electronic with 20..32V supply, 0/4..20mA output.                              0..10Volt output or +/-10Volt output

SM420 

Stroke 0 - 100 to 0- 20mm, size 30x30mm, 0,25% &  0,5%, IP67, build in electronic with 20..32V supply, 

0/4..20mA output.                             

0..10Volt output or +/-10Volt output

Overview  program  

Inductive Linear Position Sensors 

1 micro/m resolution

Measuring length 100mm to 1m

5 different option of outputs all based on Inductive Measurement 

Interfaces: 

Analog, 

CANopen 

SSI

RS-232

RS-485