Inclinometer type NG2 - NG3 - NG4
NG2 - NG3 - NG4
With high accuracy for measuring in the range of ±10, ±30 and ±80 Degree with non-amplified output / or digital pulse output.
The inclination sensors NG2, NG3 and NG4 are capacitive liquid based sensors with integrated sensor electronics. These sensors can be supplied with an analog DC output or with a digital pulse-width modulated output signal which is linear to the degree of angle. The power consumption of these sensors is very low (approx. 1mA).
The measuring principle assures a linear angle output equal to the measuring range of the sensor with a maximum range of ±80 degrees on NG4! This is independent of the size of gravity at the measuring point, so it doesnt matter if you are in Europe, Australia, or even on the moon, the angle of inclination is measured correctly everywhere.
The NG series is well suited for industrial use where the demands for high accuracy, long-term stability, and relatively large tilt angle measuring ranges are wanted.
These NG series inclinometers have been used with very good results in the mining industry, food industry, bridges, cranes, agriculture machinery, process machines, transport systems and vehicles, plus many other applications as well as OEM systems.
Print out .pdf brochure
Send mail to firstname.lastname@example.org with questions or comments about this web site.
Copyright © 2018 Nordisk Transducer Teknik
Last modified: februar 19, 2018