Sensor box SB2G with two NG-Inclinometers and two Amplifiers each with 2.5 +/-2Volt output signal

Working ranges +/- 10° or 30° or 80°

 

Special features SB2G

 

Description

The SB2G sensor box is a pressure-cast aluminum box ( IP65) with integrated sensor for twin axis Inclination   measurement.

The SB2G contains two amplifier part each with 0…5VDC output signal possibility, also as a separate part on the board there is a high-stable power supply for supplying the actual sensor ( this can also be taken out as an ref. Voltage ! ). The amplifier for the Signal output, contains also a low-pass filter for upper frequencies limitation. Rise-time constant as a specific value, + an max. current output limitation, can also be a part of the custom built unit. Supply noise suppression filter and diode bridge for guarantee of the Electromagnetic Compatibility are also a standard part in this unit. Sensor and amplifier are galvanic isolated from the housing.

In the SB2G box the NG type sensor are implemented, which means a very high degree of a accuracy on the measuring of inclination and an considerably reduced temperature drift over the whole temperature range, this as the highest degree of accuracy of all SEIKA products.

A strong metal PG cable gland and the solid and compact housing for the whole Sensor box in connection with the high voltage signal output gives al together a high-quality system for use under many types of difficult working conditions.

Applications

The SB2G is used everywhere, where inclination or acceleration measurements are wanted together with a high level DC voltage output. In particular in cars, lorries, radar systems, bridges, ships, in agricultural machinery and in all types of process machinery, just name it !. SB2G can be for very good use nearly everywhere, where very high accuracy are asked for.

 

Options: Special measuring ranges, test report, Silicone filled housing, custom wiring

 

Dimensions and pin assignments

CAUTION ! Do not short-circuit the operating voltage (8 to 30V) with one of the outputs !

Print out .pdf brochure

Send mail to ntt@ntt.dk with questions or comments about this web site.
Copyright © 2024 Nordisk Transducer Teknik
Last modified: januar 29, 2024